隐藏式屋面板

Material: 0.4mm Minimum Thickness, 0.7mm Maximum Thickness
The 0.5mm thickness raw material for inspection, in common use
Feeding width: Approx. 736mm, Effective width: 600mm
Feeding width: Approx. 586mm, Effective width 450mm
PPGI, PPGL, Yield strength 340–500 Mpa
Machine Components
5Ton*750mm Hydraulic un-coiler
Hydraulic system to expand coil inner hole;Pump motor:3KW;
Frequency Inverter to regulate turn speed;Motor:3KW
Coil Inner-diameter=510±30mm. Coil Outer-diameter Max. 1300mm;
Taper wedge expanding system
Load Capacity: Max. 5 Tons; Coil Width Max. 750mm;
Automatic stopping device with limited switch as assistance to control stop/star rotation
Cold Rolling Mills
The feeding section with guide;
Un-powered film-on device
Gear/Sprocket driving, 18-step to form
Rollers manufactured from 45# steel, CNC lathes, hard Chrome Coated.
Shaft Diameter=Φ75mm, Precision Machined
The Tooling is configured using pre-machined Spacers, which are designed to allow for different width of panel to be formed.
Main Motor=7.5KW, Frequency control
Forming speed approx. 15m/min
Protection mesh cover above the roll form to avoid the hands going it;
Hydraulic Cutting Device
Stop to cut, Post cut, No blanking cutting
Cutting tool material: Cr12, Heat treatment
Hydraulic unit, Pump motor =4KW
Two pairs of cutting blades
PLC Control System
Control the quantity & cutting length automatically
Combined with: PLC(Delta), Inverter(Delta), Touch Screen(WEINVIEW), Encoder(Omron), etc
Cut-to-length tolerance≤±2 mm
Control Voltage 24V
Product Rack Un-powered, 3 units
Electric Lock-Seaming Machine (Electric standard: 220V/1Ph) –one unit
Hand Seaming-Edge Pincers–two units